F10SC Veterinary Disinfectant

0 out of 5

£19.99£272.99 available on subscription

SKU: MAH_SC100 Category: Tags: ,


F10®SC is a veterinary disinfectant which achieves a broad spectrum kill of potentially harmful micro-organisms. It is active against bacteria, viruses, fungi and spores. It can also be used for the control of parasitic protozoal diseases such as cryptosporidiosis, coccidiosis and giardiasis by eliminating the oocysts in the environment.

At recommended dilutions it is non-corrosive, non-tainting and non-irritating, and is chlorine- and aldehyde-free. It is an excellent product for effectively achieving a high level of biosecurity and when used at recommended dilutions it is safe to use in the presence of animals. For best results F10®SC should be allowed to air dry – i.e. do not wash off.

Available in 100ml, 200ml, 1 litre and 5 litre bottles, and also in 1 litre pre-diluted “Ready to use” bottles.


  • Effective general disinfection of all hard surfaces (such as tables, floors and cages)
  • For animal housekeeping procedures (such as the cleaning of food and water bowls and bedding)
  • F10®SC can be sprayed on and left to disinfect after cleaning to provide additional biosecurity – at recommended dilutions it is safe to use in the presence of animals so can ‘air-dry’
  • Fogging of entire rooms and hard to reach surfaces
  • Fogging of air spaces to eliminate air-borne micro-organisms

Note – F10®SC should be used on surfaces which are already ‘clean’, but need disinfecting – i.e. remove any visible dirt from the surface before use. For a ‘one-step’ product for light duty cleaning, where a detergent is needed, use F10®SCXD.

Use biocides safely. Always read the label and product information before use.


These dilution rates mean that F10® is one of the most cost-effective disinfectant ranges on the market.

  • General disinfection at 1:500 (2ml in 1 litre)
  • High level disinfection against bacteria, fungi and most viruses (including coronavirus) at 1:250 (4ml to 1 litre)
  • For use against the most resistant viruses such as Parvovirus or PBFD at 1:100 (10ml in 1 litre)
  • For the environmental control of the protozoal oocysts of cryptosporidium, coccidia and giardia use at 1:100 (10ml in 1 litre)


Whichever you are more comfortable using, the end result will be the same as each provide the same high levels of safety and effective disinfection. Some prefer the Ready to Use as it is pre-diluted and can be sprayed straight from the bottle. The concentrates – F10SC and F10CL – are most cost effective, but need to be diluted at the correct rate. Some feel the CL is better for them as the dilution rate means that you will ultimately be less wasteful if you do not measure accurately (for high level disinfection you would use 20ml in 1 litre of water, whereas you would only use 4ml of SC in 1 litre of water). Whereas others prefer the SC as it is available in smaller bottles, so is a more space-efficient option.


See here for technical information on the F10® product range and for the attributes of F10® Core Actives.

These products are developed by Health and Hygiene (Pty) Ltd in South Africa. Please visit their website for further product details.

The F10 product range is not tested on animals.

Recycling logoAlmost all plastic elements used in the packaging of F10® products are made from HDPE 2 materials and are widely recycled. This includes the bottles, caps, pumps, sprays, tubes and tubs.

Additional information

Weight0.1 kg

100ml, 200ml, 1 litre, 5 litre, 5 litre with dispensing pump